Display - MALUX SED OPH-810R User Manual

SED OPH-810R
3 Call Alert: Sets one of the following alert
types: Ring Only, Vibration Only, Vibration
and Ring, and Mute. Select the desired alert
type. Press the OK key to confirm the settings
and exit. Press the C key to exit without
saving the settings.
4 Power-On Music: Turns on or off the
power-on music.
5 Power-Off Music: Turns on or off the
power-off music.

Display

1 Back Light: You can set the duration of the
back light to 5, 10, 20, or 30 seconds, or 5
minutes as required.
Note: Usually a short duration for the back
light is set to prolong the standby duration of
the handheld.
2 Greeting: You can set the greetings
displayed on the main screen.
3 Set Wallpaper: You can choose different
pictures for the standby screen.
You can press direction keys to select a
standby interface and then press the OK key
User Manual
to save the interface.
4 Signal LED: After this option is set to
Enable, the indicator in the upper left part of
the handheld blinks.
During switch-on:
1) If no network is available (the
handheld is beyond the network service
area or enters a blind area), the indicator
emits a red light and blinks at an interval
of three seconds.
2) In the event of a missed call, the
indicator emits a green light and blinks at
a short interval.
3) During normal use and without
exception, the indicator emits a green
light and blinks at an interval of three
seconds.
Charging in powered-off state:
1) During charging, the indicator is red
and is solid on.
2) When charging is complete, the
indicator is green and is solid on.
5 Contrast: Select Manual Adjust, and press
the OK key. Then, press up/down direction
www.malux.se
- 61 -