For operation and commissioning, the application of standard IEEE 802.3af is compulsory. Contrary to the normal FernTel IP, the FernTel IP Z2 / Z22 has no LAN cable plug bush. Also, there is no second LAN receptacle on the right-hand side of the telephone. Thus the LAN plug for the LAN cable is no longer part of the delivery.
Page 3
Marking on connection X101 The configuration of the FernTel IP Z2 / Z22 follows as described in the operating manual of the normal FernTel IP. www.malux.se...
Employers' Liability Insurance Association regarding the use of electrical systems and devices must be observed. – The device may be operated solely under the stated ambient conditions. Unfavourable ambient conditions can lead to damage of the device and thus present a potential danger for the user. www.malux.se...
Page 5
The device then poses a potential threat to the user’s life and can cause the ignition of an explosive atmosphere. CE symbol The FernTel IP Z2 / Z22 fulfils the demands of the ATEX directive 94/9/EC, the EMC Directive 2004/108/EC, the Low Voltage Directive 2006/95/EC and the R&TTE Directive 1999/5/EC.
Housing degree of protection IP65 Labelling Firma FHF Funke+Huster Fernsig GmbH Type FernTel IP Z2 DEKRA BVS 08 ATEX E 022 CE 0158 II 3 G Ex nA ic IIC T5 Gc II 3 D Ex tc ic IIIC T80°C Dc -20°C Ta +55°C...