Page 2
"use with gloves" and made of V4A steel is easy to operate and thus meets all requirements for a modern and reliable communications device. The ResistTel MB phone offers a reliable communication channel when connected to the public network or to PBX systems.
6. An acknowledgement tone confirms that the settings have been stored. 7. When you receive a call, the ResistTel MB phone rings with the selected volume. 8. Changing the settings can be prevented by setting a PIN number.
In case of issues which cannot be solved by phone, please send the complete device with a copy of the sales receipt to the following address: Support ResistTel MB Gewerbeallee 15-19 D-45478 Mülheim an der Ruhr If no errors are found during the inspection, we shall issue an invoice for the processing fee.
Page 6
Overview of the device Exterior view of the lower part of the phone (Screws) (Lower part of the phone) (Hook) Interior view of the upper part of the phone (Top part of the phone) (Pin header) www.malux.se...
Page 7
Overview of the device Interior view of the lower part of the phone (Screws) ......(Lower part of (Speaker cable) the phone) (Reed contact) 9))cable) Keypad (Keypad connector) (Programming interface) (Sealing plug) (Cable gland) (Sealing plug) www.malux.se...
Keypad Label field Volume settings buttons for setting the volume of the handset, speaker (hands- free and open conversation) and headset during the conversation Speed dialling button Loudspeaker button Disconnect button Redial button Second call button Numeric keys www.malux.se...
Package contents The package contains: ResistTel MB phone Operating manual 2 sticky label panels MB sticker Assembly and installation The device can be installed only on a solid and vertical wall. Loosen the screws of the cover (2) (see the overview of the device on page 5 to 7) and take off the top part of the phone (1).
Page 10
Mount the upper part of the phone and fasten it with four cover screws (2) to the lower part of the phone. When optional accessories are removed, close the openings created with the appropriate sealing plugs. www.malux.se...
The support force for holding the handset is infinitely adjustable. Loosen the screws (12) and slide the snap-in hook (13). If you slide the snap-in hook together, the support force increases, if you slide them apart, the force decreases. Tighten the screws again. www.malux.se...
8 mm) and the type of the surface (steel, wood, concrete, sheetrock etc.) and please select accordingly. Putting into service The ResistTel MB phone is ready for operation immediately after connecting it to the network. Maintenance The ResistTel MB phone does not contain any components requiring maintenance.
Hands-free mode If you turn on the ResistTel MB phone with the button, it starts up in hands-free mode. You can modify the speaker volume of the conversation using the buttons.
If the headset is connected, the phone switches from open conversation to headset mode. Open conversation is therefore not possible with the headset. If you turn on the ResistTel MB phone with the button, it starts up in headset mode. If you lift the handset in the headset mode, the handset is given priority.
Place the handset back or press the speaker button in hands-free or headset mode. Making a second call is an additional service of the network operator or of the PBX you use. www.malux.se...
Signal tones _______ Acknowledgement sound _ _ _ _ Error sound PIN-Ping, Request to introduce the PIN number Indication sound, selected speed dialling memory is not empty www.malux.se...
Maximum length of trunk access code: 5 digits The trunk access code will be deleted. Setting the length of pause after dialling a trunk access code { Trunk access code pause } Trunk access code pause:= Factory setting: 3 www.malux.se...
Technical support service in Germany, Mülheim an der Ruhr: Phone number 0208 82 68 0 0208 82 68 286 E-mail info@fhf.de Please use the country code if calling from outside Germany: Phone number +49 208 82 68 0 +49 208 82 68286 www.malux.se...
Setting the procedure when disconnecting the headset { Optional headset } Optional headset:= Disconnect (hang up) if the headset is disconnected in case of headset mode activated. Maintain the connection if the headset is disconnected in case of headset mode activated. www.malux.se...
260 mm x 228 mm x 135 mm Depth Weight cca. 5.5 kg Keypad - Metal keypad protected against icing - 21 keys with the appropriate inscription Operating position Vertical wall-mounted. The device can be installed only on a level surface. www.malux.se...
Page 23
6 levels can be selected including muted (The ring tone volume is reduced by approx. 13 dB(A) when the optional external speaker is turned on.) Ring tone tunes 10 tunes can be selected www.malux.se...
Page 24
- adjustable in 7 levels permanently or temporarily Headset volume - adjustable in 7 levels permanently or temporarily Signal tones - Signal tone in case of successful or incorrect configuration, when requesting the PIN number and changes of data stored in the memory www.malux.se...
- R&TTE Directive 1999/5/EC following directives - Low Voltage Directive 73/23/EEC and standards: - EMC Directive RL89/336/EC for residential and Industrial areas - ETSI TBR 38: May 1998 - ETSI TS103021-1 (2004-05) - ETSI TS103021-2 (2004-11) - ETSI TS103021-3 (2003-08) www.malux.se...
Other replacement parts can cause damage and it will void the warranty. 6. Cut off the power supply before performing maintenance works or replacement of the phone. If repair or maintenance work must be performed under power, they can only be performed by professionals. www.malux.se...
12. We reserve the right to modify the product for its technical development without preliminary notice. CE marking The ResistTel MB phone complies with the following directives: R&TTE Directive 1999/5/EC Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC...