Call Setup - MALUX SED OPH-810R User Manual

SED OPH-810R
recorded in the handheld, will be lost if you
restore factory settings. Therefore, back up
your data first.
5 Speed Dial Set: You can relate special
phone numbers to numeric keys 1 to 9 on the
keypad by using this function. After setting,
you can quickly make a call by pressing a
number key and the dialing key in standby
mode.
6 Voicemail: You can set or edit your
voicemail number. To call your voicemail
number, hold Key 1 on the standby interface.

Call Setup

This function allows you to perform
call-related settings. Certain settings in this
function require support from the network. For
details, consult your network service provider.
1 Answer Mode: You can choose Send key
or Any key as the answer mode.
2 Call Wait: The handheld supports functions
such as call hold and call waiting. After this
function is enabled, the network notifies you
of another incoming call during an ongoing
User Manual
call. You can hold the current call and answer
the new call.
1) Query Status: Select this option to
display the current call waiting status.
2) Activate: Use this function to start call
waiting. If you have an incoming call
during a call, you will hear a light ring
tone. In that case, you can hold the
current call, and answer the new call.
During the call, you can switch between
the two calls.
3) Deactivate: Select this option to
cancel the call waiting service.
3 Call Divert: Call divert is a network function.
This function can divert incoming calls to
another designated handheld, voice mail or
pager, thus avoiding missed calls. Several
divert modes are available:
1) All Voice Calls: All calls are diverted
to the designated number.
2) If Busy: During a call, new incoming
calls are diverted to the designated
number.
3) If No Reply: Incoming calls are
www.malux.se
- 65 -