Lifetime FRONT COURT QUICK ADJUST II Owner's Manual
  1. Manuals
  2. Brands
  3. Lifetime Manuals
  4. Sports & Outdoors
  5. FRONT COURT QUICK ADJUST II
  6. Owner's manual

Lifetime FRONT COURT QUICK ADJUST II Owner's Manual

Basketball system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1

Advertisement

Table of Contents
loading

Related Manuals for Lifetime FRONT COURT QUICK ADJUST II

Summary of Contents for Lifetime FRONT COURT QUICK ADJUST II

  • Page 2 Maintaining your privacy is our long-standing policy at Lifetime. And you can rest as- sured that Lifetime will not sell or provide your personal data to other third parties, or allow them to use your personal data for their own purposes.

  • Page 3: Safety Instructions

    POLE SECTION IDENTIFICATION Identify the pole sections before beginning assembly. Failure to assemble the pole sections correctly may result in severe personal injury or property damage as described on Page Two. ONCE THE POLE SECTIONS HAVE BEEN SEATED, THEY CANNOT BE SEPARATED. Note: Tapers and flares are exaggerated in the illustrations.

  • Page 4: Parts List

    PARTS LIST Part # Description 1018846 Top Pole 1018845 Middle Pole 1018847 Bottom Pole 1018718 Right Backboard Bracket 1018717 Left Backboard Bracket DD00200 Net 502025J Inner Guard 502026J Outer Guard 510022 Wheel B110001 1.3cm x 40cm Axle 1030034 Base 1018844 Extension Arm 1018881 Adjustment Mechanism...
  • Page 6 PARTS LIST Part # Description Main Hardware (HP21800) CF01699 0.95cm Nylon Plug 301008 1.3cm Centerlock Nut 500105 1.3cm Nylon Plug BB01000 1.3cm x 16.8cm Hex Bolt 302007 0.95cm x 16.5cm Hex Bolt 302008 0.95cm Centerlock Nut 500038 1.3cm x 0.95cm Spacer BS02000 0.6cm x 1.9cm Pole Joint Screw Rim Hardware (1012253)
  • Page 7 HARDWARE IS ACTUAL SIZE (Unless otherwise indicated) (Not actual size) (Not actual size) (Not actual size) Tools and Materials Required for Assembly (Not Included) 1. Adjustable Wrench 7. 9mm Socket Wrench 2. 163 Kg. (362 lb.) of Sand/ 8. Funnel Water Supply 9.
  • Page 8 PARTS LIST Part # Description Frame Pad Hardware (HH00700) BS00100 #10 x 2.2cm Self-Drilling Screw 10 Base Hardware (1031944) CF00199 Base Plug BD00200 1.3cm x 17.8cm Axle 500032 1.3cm x 0.3cm Spacer 1003221 0.6cm Hex T-Nut 1003225 0.6cm x 8cm Hex Shoulder Screw 1 WW 300097 0.8cm Nylock Nut 300030...

  • Page 9: Pole Assembly

    Pole Assembly Hardware Bag # HP21800 1.1: Align the small hole in the Top Pole (TP) with the slot in the Middle Pole (MP) and slide the Top Pole over the Middle Pole. Do not jam the poles together until instructed. Insert a 0.6cm x 1.9cm Screw (Z) through the hole in the Top Pole and into the Middle Pole.
  • Page 10 Hardware Bag # HP21800 This step cannot be reversed. 1.3: Strike each end of the pole firmly 5 to 6 times on a piece of wood or cardboard. If the Top and Middle Poles do not completely cover the slots on the Middle and Bottom Poles after seating, DO NOT COMPLETE ASSEMBLY.
  • Page 11 Pole to Base Assembly Hardware Bag # 1031944 2.1: The flattened end of the Pole Brace (K) attaches to the Base (F). The angled end attaches to the Pole. Repeat for the other side of the Base. Only finger tighten the Nuts (WW). 2.2: 2.3:...
  • Page 12 Hardware Bag # 1031944 11mm 2.4: Lay the Pole on the ground with the larger holes on the Middle Pole facing up. 2.5: Place the Base over the 1.3cm x 40cm Axle (E) and step on the Base so the Axle fits into the slots in the bottom of the Base. 2.6: Rotate the Pole up so the 1.3cm x 17.8cm Axle (TT) fits into the slots in the top of the Base.
  • Page 13 Backboard and Rim Assembly Hardware Bag # 1025094 11mm Hardware Bag # PP (2) 1012253 *(Not actual size) 3.1: 3.2: Fold up the sides of the Inner Guard (B). 3.3: Ensure the U-Bolt (FF) is in the notches. Completely tighten the Nuts (NN).
  • Page 14 Hardware Bag # 1012253 13mm DD (2) 3.4: The Tap Bolts (EE) should be at the outer edge of the holes. Tighten the T-Nuts (AA) only until the Rubber Washers (DD) begin to bulge.
  • Page 15 Hardware Bag # 1012253, 1039831 13mm (1)* HH (2)* *(Not actual size) 3.5: Slide the U-Bolt (FF) slide through the two openings in the Backboard as shown. 3.6: Slide a Spacer (OO) over each Tap Bolt (EE) between the Backboard and the Backboard Brackets.
  • Page 16 Hardware Bag # 1025094 13mm KK (2) 3.7: Slide the Carriage Bolts (KK) into the channels of the Backboard and position them in the slots as shown. 3.8: Bend Backboard Brackets (LB & RB) outward. Completely tighten all Rim hardware.
  • Page 17 Backboard to Pole Assembly Hardware Bag # 1025094 19mm Hardware Bag # HP21800 16.8 cm (Not actual length) 4.1: Tighten the Nut until it is flush with the Bolt. The end with the holes closest to one another should be placed on the Poles.
  • Page 18 15mm 19mm Hardware Bag # HP21800 16.5cm (1)* 16.8 cm (2)* *(Not actual length) 4.3: Lift the Adjustment Mechanism and Outer Guard so the slots line up with the holes in the Upper Extension Arms closest to the Backboard. Only Finger Tighten the Nut in this step. WARNING Do not operate the system without the plastic guards in place over the adjustment...

  • Page 19: Final Assembly

    Final Assembly Hardware Bag # HH00700 QQ (8) Remove the plastic film from the Backboard. 5.1: While the system is still laying down, attach the Center Frame Pad (R) to the bottom of the Backboard. Align the small line in the back of the Center Frame Pad with the seam in the Backboard frame.
  • Page 20 Hardware Bag # 1031944 (Not actual size) 5.4: Insert one of the Base 5.3: Attach the Net (A). Plugs (SS) into the lower hole in the Base. WARNING Never put the system in an upright position without proper weight in the Base. The system may fall over and could result in serious personal injury or property damage.
  • Page 21 FILLING THE BASE WITH WATER: 5.3: Add water through the top hole in the Base until the water is just below the top hole (Fig. 3). Add one tablespoon of chlorine bleach to the water in the Base. Figure 3 Using two adults, carefully stand the system up.

  • Page 22: Moving The System

    Operation of the height adjustment system TO RAISE: Place the end of a long object, such as a broom handle, under the goal and push up. TO LOWER: Place the broom handle behind the Backboard and push upward into the release box. Carefully support the weight as you lower the system. WHILE TRANSPORTING THE PORTABLE SYSTEM, USE Lower Raise CAUTION TO PREVENT THE MECHANISM FROM ADJUSTING.
  • Page 23 N’accrochez rien au manche, brazos de elevación, ya que esto puede dañar el sistema y anular à l’anneau, au panneau ni aux leviers sous peine d’endommager la garantía. l’équipement et d’annuler la garantie. www.lifetime.com #FS16400 10/12/2004...
  • Page 24 If the equipment is defective within the terms of this warranty, Lifetime Products, Inc. will repair or replace defective parts at no cost to the purchaser. Shipping charges to and from the factory are not covered and are the responsibility of the purchaser.

This manual is also suitable for:

90001

Table of Contents