Table of Contents
Advertisement
1.4.10 Aligner Inspection and Cleaning
Maintenance Schedule
Clean every 750K cycles.
Procedure
Inspect for worn or damaged parts. Clean with alcohol or a soft cloth moistened
with mild detergent and warm water as needed.
To clean the Aligner Panels:
1. Lift the Aligner latches [1] to open the two panels.
[1]
[1]
2. Clean all surfaces of the aligners [2], inside and out.
[2]
[3]
Figure 1.14 Clean Aligner Panel Components (entry aligner shown).
3. Clean paper alignment channels [3].
26
Advertisement
Table of Contents
