Table of Contents
Advertisement
1.4.1 External Cleaning
The cover may be cleaned with a soft cloth moistened with mild detergent and warm
water.
Do not use chemical cleaners or solvents as these may have a harmful effect. Use
detergent sparingly to avoid contact with electrical components.
Warning: Make sure you disconnect the StreamPunch Pro from its power source
before cleaning. Failure to observe this warning could result in death or serious
injury.
1.4.2 Internal Cleaning
Occasionally remove the covers and remove paper dust and chips. Paper dust can
accumulate throughout the punch including around the motor and other electrical
components. Use a vacuum cleaner if possible. A small paintbrush can also be used
but extreme care should be used around electrical components.
Non-electrical components may be cleaned with alcohol, an approved cleaner, or a
soft cloth moistened with mild detergent and warm water. Rollers can be cleaned with
alcohol.
Warning: Make sure you disconnect the StreamPunch Pro from its power source
before cleaning. Failure to observe this warning could result in death or serious
injury.
1.4.3 Operational Inspection
Make sure the punch operates smoothly and produces the desired holes in the
customer's paper.
1.4.4 Internal Inspection
Whenever the cover has been removed for corrective maintenance, visually inspect
for defects and problems such as damaged components, loose screws or nuts,
abraded wire insulation, loose terminals, etc. Correct any problems before returning
the machine to service.
22
Advertisement
Table of Contents
