Extron electronics TLP Pro 1230WTG User Manual page 23

Input screen provides information about the video input signal status and allows
The
configuration of the input signal.
At the top of the screen the native display EDID information is shown.
1280x800 @ 50 Hz, HDMI, LPCM-2Ch . for the TLP Pro 1230WTG.
shows this is
The upper panel shows read-only information about the input signal status.
The lower panel allows adjustments to the input configuration.
•
Aspect Ratio: Press this button to toggle between
it fills the entire screen, and
• HDCP Authorization: Press the button to toggle between
On , HDCP-encrypted input signals pass to the screen.
Authorize is
• EDID Minder: Press the
1920x720 @ 60Hz for the TLP Pro 1230WTG) or setting a resolution and refresh rate.
(
The button is black if the native display is used and turns yellow if you are setting the EDID
manually.
Pressing the button opens the
Resolution panel is initially populated. Once the resolution is selected, the available
the
refresh rates for that resolution are displayed. When both the resolution and refresh rate are
Apply .
selected, press
EDID Minder — HDMI
Match EDID to
Display Native: 1920x720 @ 60 Hz, HDMI, LPCM-2Ch, Extron
Resolution
852x480
800x600
1024x768
1024x852
1280x768
1280x800
1360x765
1360x768
1365x768
1024x1024
1366x768
Figure 13. EDID Minder
Fill , which stretches the image so that
Follow , which maintains the aspect ratio of the input signal.
EDID button to toggle between using the EDID of the touchpanel
EDID Minder window. When setting the EDID manually, only
Refresh Rate (Hz)
75
60
50
Apply
TLP Pro 1230WTG • Setup Menu
figure 12 (see page 14)
On (default) and Off . When HDCP
Cancel
15