Micropilot FMR50 FOUNDATION Fieldbus
6
Installation
6.1
Installation conditions
6.1.1
Mounting position
1
A
Endress+Hauser
2
3
A0016882
• Recommended distance A from wall
to outer edge of nozzle: ~ 1/6 of tank
diameter.
Nevertheless the device should not be
installed closer than 15 cm (5.91 in)
to the tank wall.
• Not in the center (2), as interference
can cause signal loss.
• Not above the fill stream (3).
• It is recommended to us a weather
protection cover (1) in order to protect
the device from direct sun or rain.
Installation
15
Need help?
Do you have a question about the FOUNDATION Fieldbus Micropilot FMR50 and is the answer not in the manual?
Questions and answers