GRAPHTEC GL840 User Manual page 89

(11) DISPLAY
<When free-running and data capturing>
This key is used to switch the screen mode.
When running free-running (when the recording is stopped), data capturing, and
data replaying during the capture, the screen mode can be switched.
Pressing this key switches the screen display as follows:
<Waveform + Digital Screen>
Displays the waveform and the digital values.
The setting can be changed using the [SPAN/TRACE/
POSITION] key.
<Expanded Waveform screen>
Displays only the waveform expanded in full screen mode.
<Digital + Calculation Display screen>
Displays digital values and two calculation results in large
letters.
The calculation settings can be made using the Data menu.
Refer to "(2) DATA setting" in "3.4 Setting Menus".
Use the
mode. The calculation results are displayed only when switched
to "All Mode".
Refer to "(8) FAST FORWARD key (KEY LOCK)" in "3.2 Key
Operation" for details on " All Mode".
CHAPTER 3 Settings and Measurement
FAST FORWARD keys to change the display
3-13