GRAPHTEC GL840 User Manual page 163

(6)-4 Specify Save Destination (Screen Copy)
Saves the data that is replaying on the screen in the internal memory (SD1) or SD CARD (SD2) as an image
file.
<If the naming method is Auto>
Setting
(1) File Type
(2) Name Type
(3) Folder
(4) File Name
(6)-5 Execute (Screen Copy)
Executes screen copy and saves it to an image file.
* Refer to "(6)-4 Specify Save Destination (Screen Copy)" for details on specifying the save destination.
(6)-6 Save
Saves the setting conditions of the GL840.
<If the naming method is Auto>
Setting
(1) Save details
(2) Name Type
(3) Folder
(4) File Name
(1)
(2)
(3)
Sets the file format used to save data.
BMP : Saves data in bitmap file format
PNG : Saves data in ping format
Set how a data file should be named.
Auto : Automatically supplies the file name.
Example : 20150201-123456.BMP
Number part : File creation date
* The file is created on February 1,2015, 12:34:56 in this example.
BMP : Data format
BMP : Bitmap file format
PNG : Ping format
User : Data is captured to a file with an entered file name.
Sequential number : A file is created with an arbitrary file name that has been entered,
followed by a sequential number.
Specify the save destination folder. Refer to "(7) File box" for
Specify the save destination folder. Refer to "(7) File box" for details.
(1)
(2)
(3)
Set the details of saved data setting.
Operation setting: Settings related to the operation of this device are saved.
Communication setting: Settings related to the communication are saved.
Set how a data file should be named.
Auto : Automatically supplies the file name.
Example : 20150201-123456.CND
Number part : File creation date
* The file is created on February 1,2015, 12:34:56 in this example.
CND : Data format (GL840 setting file format)
User : Data is captured to a file with an entered file name.
Sequential number : A file is created with an arbitrary file name that has been entered,
followed by a sequential number.
Specify the save destination folder. Refer to "(7) File box" for details.
Specify the save destination folder. Refer to "(7) File box" for details.
CHAPTER 3 Settings and Measurement
<If the naming method is User (Arbitrary)>
(1)
(2)
(3)
(4)
Description
<If the naming method is User (Arbitrary)>
(1)
(2)
(3)
(4)
Description
details..
3-87