GRAPHTEC GL840 User Manual page 49

Mounting
Insert the lock tabs at the top of the standard terminal or the Withstand high-voltage high-precision terminal
into the slots of the GL840, and push in the terminal until the lock tabs at the bottom of the terminal are
securely locked.
(1) Insert tabs at the top of the terminal unit into the slots.
(2) Press the terminal unit in the direction shown until it is securely locked.
Press
•
If the terminal unit that comes with the standard GL800 is mounted on the GL840, the temperature
measurement accuracy may not meet the specifications.
•
If the terminal unit that comes with the standard GL820 is mounted on the GL840, the temperature
measurement accuracy may not meet the specifications.
•
The specifications of the Standard terminal (or Screwless terminal) and the Withstand high-voltage high-
precision terminal are different, so check the specifications before use.
•
The Withstand high-voltage high-precision terminal (or Screwless terminal) is not available for the GL800
and GL820.
Slot
Insert
CHAPTER 2 Checks and Preparation
Press
2-25