GRAPHTEC GL840 User Manual page 141

(4)-3 Wireless LAN setting
This is used to set the conditions when connecting the GL840 to wireless LAN.
This screen is not displayed unless the wireless unit is installed to the GL840.
Station settings
(1) Perform the wireless LAN settings.
Selection item
Off
Station
Access point
(2) Restart the wireless LAN.
When restarting after selecting the wireless LAN, the information of the station or the access point is
displayed.
It takes some time to display.
•
Access point (operated as base unit)
This is the settings for connecting between the GL840 and the separately sold Petit LOGGER GL100-WL
(up to 5 units) via wireless LAN.
•
Station (operated as remote unit)
This is the settings for controlling from a PC and transferring data to a PC after connecting to the
separately sold wireless LAN base unit.
•
After executing "Wireless LAN restart" once, the wireless LAN cannot selected. When the wireless LAN
selection is changed, the restart is enabled.
•
"Disconnect" "Wireless LAN restarting"
Access point settings
The wireless LAN is not used.
The GL840 is set to wireless LAN remote unit.
The GL840 is set to wireless LAN base unit.
"TCP-IP restarting" are executed.
CHAPTER 3 Settings and Measurement
Description
3-65