Downloading The Program To The Dsp - Analog Devices EVAL-ADAU1772Z User Manual

Evaluation Board User Guide

DOWNLOADING THE PROGRAM TO THE DSP

To compile and download the code to the DSP, click the
Link-Compile-Download button once in the main toolbar
of SigmaStudio (see Figure 28). Alternately, press the F7 key.
Figure 28. Link-Compile-Download Button
If the project does not compile correctly, an error displays (see
Figure 29). If this occurs, go back and check your work for
mistakes.
The signal flow should now be running on the evaluation board,
and the audio should pass from the input to the output. The
volume can be changed in real-time by using the buttons on
the board.
Rev. A | Page 9 of 28
Figure 29. Compile Error
UG-477