User Definable Labels On Status Screen - Siemens SINAMICS IOP-2 Operating Instructions Manual

Installation

5.4 User definable labels on status screen

Figure 5-2 Selecting and modifying the IOP-2 status screens
5.4 User definable labels on status screen
User definable labels
User defined labels allow the user to customize the labels that appear on the status screen of
the IOP-2.
There are a maximum of four labels that can be defined and they are located on the IOP-2 in
the "cps" folder. The IOP-2 must be connected to the PC via the USB connection and in "Mass
24
Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH