Siemens SINAMICS IOP-2 Operating Instructions Manual page 22

Installation
5.2 Initial set-up
Select language
All available languages are delivered with the IOP-2.
Setting time and date
When the IOP-2 is first fitted to a Control Unit, which has a real-time clock, it will
automatically display the time and date screen. Should you wish to manually set the time on
the IOP-2, the following actions should be performed:
Select Menu
Select Time and date settings
Press and hold down ESC for
Status Screen
20
Select required language
Select Extras
Set the Time and date
settings
Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH
Press and hold down ESC for
Status Screen
Select Panel settings
Set time and date
Intelligent Operating Panel 2 (IOP-2)