Siemens SINAMICS IOP-2 Operating Instructions Manual page 12

Safety notes
3.1 Warnings and cautions
Risk of death due to software manipulation when using exchangeable storage media
Storing the parameterization (incl. Safety Integrated parameterization) on exchangeable
storage media carries the risk that the original parameterization (with Safety Integrated) will
be overwritten, for example, by the IOP-2 of another drive without Safety Integrated.
Incorrect parameter assignment can cause machines to malfunction, which can lead to
injuries or death.
• Ensure that only the IOP-2 that belongs to the respective converter is used.
• Ensure that only trained or authorized personnel have access to the enclosures, cabinets
Note
• The IOP-2 can be fitted to and removed from the converter while power is applied.
• The IOP-2 will set the USS PZD (P2012) length to 4 when connected to the converter.
10
WARNING
or electrical equipment rooms.
Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH