Siemens SINAMICS IOP-2 Operating Instructions Manual page 38

Setup Menu
6.1 Example Setups
Advanced Startup Menu
This screen lists all the advanced settings that are available for
the user to modify for their specific application.
Drive Information
This screen provides general information concerning the used
converter configuration (Power Module, Control Unit and the
Intelligent Operator Panel IOP-2).
Factory Reset
This function resets all the parameters to their factory default
settings. Any safety parameters that have been modified will
not be reset.
It is recommended that you reset to the factory settings before
commissioning the converter.
Hardware Options
This screen gives the user the opportunity to setup the
converter options, for example, an Output Filter or a Braking
Resistor.
Control Type
This screen allows the application class to be set.
Depending on the particular Power Module, the converter
selects the right application class and assigns the motor control
the appropriate default settings.
36
Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH