Screen Icons - Siemens SINAMICS IOP-2 Operating Instructions Manual

Overview

4.3 Screen icons

Key Function
The INFO key has the following functions:
• Displays additional information for the currently selected item.
• Pressing the INFO key again will display the previous screen.
• Pressing the INFO key during power-up of the IOP-2 will place the IOP-2 in DEMO mode. To exit DEMO
mode, power-cycle the IOP-2.
The HAND/AUTO key switches the command source between HAND and AUTO mode.
• HAND sets the command source to the IOP-2.
• AUTO sets the command source to an external source, for example, fieldbus.
Note: When switching from the HAND mode back to the AUTO mode, the setpoint screen will change back to
the standard status screen.
Locking and unlocking the keypad
The keypad can only be locked once the power-up cycle has been completed. If the keys are
activated before the power-up cycle is completed, the IOP-2 will enter the DEMO mode.
To lock the IOP-2 keypad press ESC and INFO simultaneously for 3 seconds or more. To
unlock the keypad press ESC and INFO simultaneously for 3 seconds or more.
DEMO mode
DEMO mode allows the IOP-2 to be used for demonstration purposes without affecting the
converter to which it is connected. Menus can be navigated and functions selected, but all
communications with the converter are blocked to ensure that the converter does not react
to any commands issued from the IOP-2.
To enter the DEMO mode it is necessary to do a long press of the ESC key or INFO key during
the power-up cycle. The IOP-2 must be power cycled again to exit the DEMO mode.
4.3 Screen icons
Overview
The IOP-2 displays a number of icons at the top right-hand edge of the display to indicate
various states or current conditions of the converter. These icons are explained in the table
below.
Table 4- 2
Function
Command
source
14
Screen icons
Icon Remarks
Auto - the converter receives the command signals from the network
controller
Displayed when the JOG function is active
Hand - the converter is under control of the IOP-2
Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH