Siemens SINAMICS IOP-2 Operating Instructions Manual page 66

Menu
8.6 Customer parameter sets
Risk of death due to software manipulation when using exchangeable storage media
Storing the parameterization (incl. Safety Integrated parameterization) on exchangeable
storage media carries the risk that the original parameterization (with Safety Integrated) will
be overwritten, for example, by the IOP-2 of another drive without Safety Integrated.
Incorrect parameter assignment can cause machines to malfunction, which can lead to
injuries or death.
• Ensure that only the IOP-2 that belongs to the respective converter is used.
• Ensure that only trained or authorized personnel have access to the enclosures, cabinets
or electrical equipment rooms.
The IOP-2 file structure has been designed to allow the easy copying of parameter sets and
other configuration data from one IOP-2 to another by using the Windows File Explorer
function.
This is accomplished by simply copying the "user" folder from the IOP-2 to any number of
other IOP-2 operator panels. The IOP-2 file structure is shown below.
Figure 8-1
The "config" folder contains all the settings that have been changed on the IOP-2 itself, for
example, the language settings, lighting duration and the date/time settings, etc.
The "cps" folder contains all the downloaded or customised parameters sets and the text files
used for customising the screen labels when using the Screen Wizard.
Copying specific parameter sets
When you have saved a number of parameter sets to an IOP-2, it is possible to copy your
saved parameter sets to another IOP-2 using the simple process outlined below.
1. Connect the IOP-2 via the USB connector to a PC.
2. The IOP-2 will enter the "Mass Storage Device" Mode.
3. On the PC, navigate to the "user/cps" folder.
4. Select the parameter sets you require and save them to a new folder on the local drive of the
PC.
64
WARNING
File structure of the IOP2
Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH