Siemens SINAMICS IOP-2 Operating Instructions Manual page 64

Menu
8.6 Customer parameter sets
Using the IOP-2
The IOP-2 must be handled with particular care for all SINAMICS devices that use an IOP-2 so
that no malicious software or erroneous parameterizations are spread between different
commissioning PCs or inverters.
Risk of death due to software manipulation when using exchangeable storage media
Storing files onto exchangeable storage media amounts to an increased risk of infection of
the commissioning PCs, e.g. with viruses or malware. Incorrect parameter assignment can
cause machines to malfunction, which can lead to injuries or death.
• Protect files stored on exchangeable storage media from malicious software using
appropriate protection measures, e.g. virus scanners.
Risk of death due to software manipulation when using exchangeable storage media
Storing the parameterization (incl. Safety Integrated parameterization) on exchangeable
storage media carries the risk that the original parameterization (with Safety Integrated) will
be overwritten, for example, by the IOP-2 of another drive without Safety Integrated.
Incorrect parameter assignment can cause machines to malfunction, which can lead to
injuries or death.
• Ensure that only the IOP-2 that belongs to the respective converter is used.
• Ensure that only trained or authorized personnel have access to the enclosures, cabinets
or electrical equipment rooms.
Creating a custom parameter set
This procedure makes the following assumptions:
• The user is conversant with the copying and renaming of files in the Windows
environment
• The user is conversant with commissioning the converter
• The user has already changed all the relevant parameters for their application
Select Menu
62
WARNING
WARNING
Select Up/Download
Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH
Select Upload: Drive to Panel
Intelligent Operating Panel 2 (IOP-2)