Siemens SINAMICS IOP-2 Operating Instructions Manual page 69

Intelligent operating panel 2

Hide thumbs Also See for SINAMICS IOP-2:

Table of Contents

Panel settings

Language

This option allows the user to select the language that is

used to display information and text on the IOP-2. This

option has been previously described in the initial set-up

section of this manual. Languages can be added or deleted

using the USB connection on the IOP-2 and a PC.

For details of selecting this function see

(Page 18)

Time and date settings (including Daylight savings time)

If the CU to which the IOP-2 is fitted has a real-time clock, then the option to set the correct

date and time (including daylight savings time is presented in the "Panel settings" menu.

The Time and date settings allow you to setup up the following:

• Date format- This allows the date format to be select either DD/MM/YY or MM/DD/YY.

• Time and date settings- This allows the user to set the required date and time of the

internal real-time clock of the Control Unit.

• Daylight saving time- This allows the user to setup the daylight saving time difference on

the Control Unit (CU230P-2) real-time clock. The daylight saving time is set to take into

account not only the time difference but also the date and time of the change to and from

daylight saving time. The setup of the DST function is shown in the following procedure.

Select Menu

Select Daylight saving time

Intelligent Operating Panel 2 (IOP-2)

Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH

Initial set-up

Select Extras

Set DST time difference

8.7 Extras Menu

Select Time and date settings

Set month DST starts

Table of Contents

Show Quick Links

Table of Contents