Siemens SINAMICS IOP-2 Operating Instructions Manual page 25

Intelligent operating panel 2
Hide thumbs Also See for SINAMICS IOP-2:
Table of Contents

Advertisement

Select a different status screen
To select a different status screen the following procedure should be performed:
1. When the status screen is displayed, use the UP arrow key to enter the screen selected
mode.
2. Using the LEFT and RIGHT arrow keys, select the required status screen.
3. Press ESC or the DOWN arrow key to accept the new status screen and exit the screen
selection mode.
Modify the display data
To modify the data that is displayed on the status screen, the following procedure should be
performed:
1. Use the UP key to enter the status screen selection mode.
2. Press OK to edit the displayed data.
3. Use the arrow keys to navigate around the screen until the data you wish to change is
highlighted. Press OK to edit the highlighted data.
4. Press OK to edit the parameter to be displayed.
5. Select the new parameter you wish to be displayed. Press OK to accept the new selection.
6. The new parameter selection is shown in the list. Press ESC or the DOWN arrow key to return
to normal functions of the IOP-2.
7. The status screen is shown with the new data values and the screen menu is shown.
An overview of the basic procedures is shown in the figure below.
Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH
Installation
5.3 Changing the Status screens
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents