Siemens SINAMICS IOP-2 Operating Instructions Manual page 39

Motor Data
The motor data stored here corresponds to the 4-pole SIEMENS
standard motor with the same converter power.
For dynamic applications and when other OEM motors are in
operation, adaptation of the settings will need to be made.
Limit Settings
This screen give the user the opportunity to setup the dynamics
settings of the motor, for example, minimum and maximum
motor speed, ramp-up and ramp-down timings and OFF-3
ramp-down time.
Optimisation
This screen makes is possible to optimise the converter for the
technological applications and ensures that the correct motor
data will be used.
I/O Setup
This screen allows the I/O configuration to be defined. The I/O
configuration is pre-assigned using macros so that no further
settings are necessary.
Fieldbus Setup
This screen allows the communications interface settings on
the converter to be configured.
Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH
Setup Menu
6.1 Example Setups
37