Operation | Automax 100 | Extension module TS-AC E2-M3-1X
WBM interface for IoT Gateway „Licensed software"
7.
ATTENTION! A hardware reset of the IoT gateway must be done so that the licensed
software is available in its full functionality. To do this, disconnect the extension module
from the supply voltage approx. 30 seconds
8.
Start the WBM interface of the IoT Gatway and log in with your access data (Username
and Password). The start screen has been extended with the unlocked features after
the licensing. See the following figure
IoT WBM interface „Home screen with advanced features after licensing"
9.
The licensing of the IoT software / software options is now completed
9.1.5
IoT Gateway / Overview of the WBM interface
The following figure shows an overview of the Web Based Management interface of the IoT
Gateway.
Bosch Rexroth AG | 05.2021 | DOK-SUPPL*-TS-AC E2-M3-ITRS-EN-P
73/94