Maintenance and repair ....24 specifications and other information set forth in it, are the exclusive property of Bosch Decommissioning ....24 Rexroth AG.
3 609 929 B64/2008-05 | IMpnio Bosch Rexroth AG 17/84 About this document • Always include the operating instructions when you pass the IMpnio interface This manual contains important information module on to third parties. on the safe and appropriate assembly,...
Page 4
18/84 Bosch Rexroth AG IMpnio | 3 609 929 B64/2008-05 Qualified personnel are those who can This warning symbol cautions recognize possible hazards and institute the against dangers to your health. appropriate safety measures due to their Observe all the safety instructions...
3 609 929 B64/2008-05 | IMpnio Bosch Rexroth AG 19/84 Only use the product within the performance Never use solvents or aggressive detergents. range provided in the technical data. Only clean the product using a slightly damp, lint-free cloth. Only use water to do this and, Persons who assemble, operate, if necessary, a mild detergent.
Page 6
20/84 Bosch Rexroth AG IMpnio | 3 609 929 B64/2008-05 Device description Suitable connection plugs Use connection plugs in accordance with Transfer rates of 10 MBit/s or 100 MBit/s are standard IEC 61158. supported. Display elements The NS LED indicates the Profinet status.
3 609 929 B64/2008-05 | IMpnio Bosch Rexroth AG 21/84 Transport and storage The MS LED indicates the interface module status. For storing and transporting the product Table 4 MS always observe the ambient conditions specified in the technical data (see...
22/84 Bosch Rexroth AG IMpnio | 3 609 929 B64/2008-05 Assembly CAUTION When installing the product always observe Risk of injuries when the ambient conditions specified in the assembling under voltage! technical data (see “Technical data” on page 27). If you do not switch off the power...
Page 9
3 609 929 B64/2008-05 | IMpnio Bosch Rexroth AG 23/84 1. Always switch off the power supply to the relevant system component before assembling the IMpnio interface module. 2. Insert the IMpnio interface module into the appropriate slot on the system component until it catches (example in Fig.
24/84 Bosch Rexroth AG IMpnio | 3 609 929 B64/2008-05 Commissioning Operation Operation is not necessary while the system CAUTION is running. Risk of damage to persons and property! Commissioning of the IMpnio Maintenance and interface module requires basic repair mechanical and electrical knowledge.
3 609 929 B64/2008-05 | IMpnio Bosch Rexroth AG 25/84 Disassembly and replacement Required tools Proceed as follows to disassemble the IMpnio interface module: • TX9 screwdriver 1. Make sure the relevant system Disassembling components are not under voltage. 2. Loosen the front torx screws. The IMpnio...
Therefore dispose of the device in Table 5 MS accordance with the currently applicable LED display Meaning regulations in your country. Exception error, module You can also send the device to Bosch in “EXCEPTION” status Rexroth for disposal. Flashing red Configuration error (Flashes once: ...)
3 609 929 B64/2008-05 | IMpnio Bosch Rexroth AG 27/84 Technical data Table 6 General data IMpnio Order number 0 608 830 272 Dimensions (width x height x depth) 50.1 x 22.3 x 56.8 mm Weight 30 g Operating temperature range...
28/84 Bosch Rexroth AG IMpnio | 3 609 929 B64/2008-05 Service and sales Service Sales Bosch Rexroth AG We are always the right partner when it Electric Drives and Controls comes to system know-how. Schraub- und Einpress-Systeme For any problem: Service from Rexroth Fornsbacher Str.