Table of Contents
Advertisement
Assembly | Automax 100 | Extension module TS-AC E2-M3-1X
Basic modules for assembly
Quantity
Mat.-No.:
1
R901540862
1
R901540131
1
R901540427
The basic module is still in planning phase. For information on the market launch, please contact your Bosch Rexroth
sales representative
7.4
Assembling the product
Compromising of the training system, individual components or other assets. Risk
for safe operation of the training system!
Risk of injury or death for operator or third
Chapter
„Safety
instructions" as of page [5] in these operating instructions must
always be observed!
In case of damage, wear and/or contamination of the safety socket, functional safety
of the plug-in connection can be no longer ensured!
Risk of damage of extension module TS-AC E2-M3-1X, malfunction!
Check the safety sockets by visual inspection for wear and contamination
Remove any contamination on surfaces
Incorrect handling during connection or disconnection can cause damage at the
safety socket or the safety plug. In case of damaged parts, functional safety of the
plug-in connection can be no longer ensured!
Risk of damage at extension module TS-AC E2-M3-1X, property damage, malfunction!
Before connection, make sure that
–
Plugs and socket are not broken, cracked or deformed
–
Contact pins are not bent, broken or corroded
Make sure that plug and socket are not jammed and can be connected without force
Designation
Basic module TS-AC B2-M1-1X
Basic module (attachment type for WS290, WS200, ...)
Basic module TS-AC B1-M2-1X
Basic module with network switch (table model)
1)
Basic module TS-AC B1-M3-1X
Basic module with emergency stop function
DANGER
NOTICE
NOTICE
Bosch Rexroth AG | 05.2021 | DOK-SUPPL*-TS-AC E2-M3-ITRS-EN-P
49/94
1)
(table model)
Advertisement
Table of Contents
