Hazards By Improper Use; General Informations; Protection By Means Of Protective Extra Low Voltage (Pelv) Against Electric Shock; Protection Against Contact With Hot Parts - Bosch rexroth Automax 100 Operating Instructions Manual

Safety instructions | Automax 100 | Extension module TS-AC E2-M3-1X
2.6.2

Hazards by improper use

Hot surfaces possible on device housings!
Risk of injury! Risk of burning!
Risk of injury by improper handling!
Injury due to crushing, shearing, hitting or incorrect handling!
2.6.3

General informations

 In case of damage due to non-compliance with the warnings in these operating
instructions, Bosch Rexroth AG will not accept any liability
 Before the commissioning, the operating, maintenance and safety instructions are to be
read. If you have not understood the documentation in the available language, please
contact your responsible Bosch Rexroth customer service
 The unobjectionable and safe operation of this device requires appropriate and proper
transport, storage, assembly and installation as well as careful operation and
maintenance
 You must observe the safety regulations and provisions of the country where the device
is used
 The environmental conditions specified in the product documentation must be observed
 Technical data as well as connection and installation conditions are available in the
product documentation and must imperatively be observed
2.6.4 Protection by means of protective extra low voltage (PELV) against
electric shock
All connections and terminals with voltages of U
protective extra low voltages which are designed in a contact-protected form according to
the product standards.
High electric voltage by incorrect connection!
Danger to life, risk of injury by electric shock!
 At all connections and terminals of this product, only devices, electric components and
lines with protective extra low voltage (PELV) may be connected
 All power sources for protective extra low voltage must ensure secure separation from
dangerous voltages. These include:
–
Accumulators
– Safety transformers according to VDE 0551
–
Power sources with protection properties like functional low voltage with secure
separation (PELV)
2.6.5

Protection against contact with hot parts

CAUTION
CAUTION
= 0 to 24 V at Rexroth products are
DC
WARNING
Bosch Rexroth AG | 05.2021 | DOK-SUPPL*-TS-AC E2-M3-ITRS-EN-P
7/94