2/94
About this documentation | Automax 100 | Extension module TS-AC E2-M3-1X
Bosch Rexroth AG | 05.2021 | DOK-SUPPL*-TS-AC E2-M3-ITRS-EN-P
1.3.1
Safety instructions
In this documentation, safety instructions are included whenever sequences of actions are
explained which bear the danger of personal injury or damage to property. The measures
described for the hazard avoidance must be observed.
Safety instructions are set out as follows:
Type and source of danger
Consequences of non-compliance
Hazard avoidance measures
<List>
Warning sign: Draws attention to the danger
Signal word: Indicates the seriousness of the danger
Type and source of danger: Designates the type and source of danger
Consequences: Describes the consequences of non-compliance
Precautions: Specifies how the danger can be prevented
Risk classes according to ANSI Z535.6-2006
Warning sign, Signal word
DANGER
WARNING
CAUTION
NOTICE
SIGNAL WORD
Meaning
Indicates a dangerous situation which may cause death or
severe personal injuries if not avoided
Indicates a dangerous situation which may cause death or
severe personal injuries if not avoided
Indicates a dangerous situation which may cause minor to
medium personal injuries if not avoided
Indicates damage to property: The product or the environment
could be damaged