Front With Operating Equipment - Bosch rexroth Automax 100 Operating Instructions Manual

18/94 About this product | Automax 100 | Extension module TS-AC E2-M3-1X
Bosch Rexroth AG | 05.2021 | DOK-SUPPL*-TS-AC E2-M3-ITRS-EN-P
Quantity Mat.-No.:
1 R901540427
The basic module is still in planning phase. For information on the market launch, please contact your Bosch Rexroth
sales representative
The following figure illustrates the extension module TS-AC B1-M3-1X with blurred basic
module TS-AC B1-M2-1X (tabletop type).
The basic module TS-AC B1-M2-1X is only used for illustration. However, it is not included
in the scope of delivery.
Basic module with extension module TS-AC E2-M3-1X
5.2.1

Front with operating equipment

As main components, one mini industrial PC, one bus coupler and various digital and analog
inputs can be found on the front of the extension module. By means of M12 connectors,
sensors and actuators can be connected to the inputs. For voltage supply, the extension
module is connected to a basic module via measuring lines with safety plugs. For
identification of operating equipment in the electrical circuit diagram, operating equipment
designations (BMK) according to EN 81346 are used, e.g. IndraControl PR21 = -7KE1
(BMK).
Designation
Basic module TS-AC B1-M3-1X (tabletop type)
Basic module with emergency stop function 1)