Environmental Specifications - GE PACSystems RX3i User Manual

A

Environmental Specifications

Vibration
Shock
Operating Temperature
Storage Temperature
Humidity
EMC Emissions
Radiated, Conducted
EMC Immunity
EMC Requirements & Test for
Programmable Controllers
Electrostatic Discharge
RF Susceptibility
Fast Transient Burst
Surge Withstand
Damped Oscillatory Wave
Conducted RF
1) EN 61000-4-x series of tests are technically equivalent to the IEC 61000-4-x series.
2) Not applicable for communication, I/O, I/O power, Auxiliary power output or DC Input power
lines whose maximum installed length is less than 3m (9.1ft).
3) Not applicable to RS232 ports and those ports limited to 30m (98ft.) or less.
4) Not applicable to communication or I/O lines whose maximum installed length is 3m (09.1ft)
or less.
PACSystems* RX3i Power System Measurement Module – February 2013
A-2
IEC60068-2-6, JISC0911
IEC60068-2-27, JISC0912
CISPR 11/EN 55011/
EN55016-2-3
47 CFR 15
EN 61131-2
EN 61000-4-2
EN 61000-4-3
2
EN 61000-4-4
EN 61000-4-5
ANSI/IEEE C37.90a,
EN 61000-4-12
EN 61000-4-18
EN 61000-4-6
10 - 57 Hz, 0.006" displacement peak-
peak
57 - 500 Hz, 1.0g acceleration
15G, 11ms
0°C to 60°C: [surrounding air] (32° F to
140°F)
-40°C to +85°C (-40° F to 185°F)
5% to 95%, non-condensing
Group 1, Class A
30 – 230 Mhz 50.4 dBuV/m
230 – 1000 Mhz 57.4 dBuV/m
30 – 88 Mhz
88 – 216 Mhz 53.9 dBuV/m
216 -960 Mhz 56.8 dBuV/m
> 960Mhz
[applies to CE Marked modules]
Zone B
1
8KV Air, 4KV Contact
1
10 Vrms /m: 0.80 -1.0GHz,
3 Vrms/m :
1 Vrms/m:
1
Unshielded I/O Signal: 1KV
1
Unshielded I/O Signal
DM
Unshielded I/O Signal: 2.5kV CM (200)
1
1MHz, 400Hz rep rate
1
Unshielded I/O Signal 4 : 10V rms
49.5 dBuV/m
59.9 dBuV/m
1.4 - 2.0GHz
2.0 - 2.7Ghz
3 : 1kV CM, 0.5kV
GFK-2749