Government Regulations - GE PACSystems RX3i User Manual

Government Regulations

U.S., Canadian, Australian, and European regulations are intended to prevent equipment from
interfering with approved transmissions or with the operation of other equipment through the
AC power source.
The PACSystems RX3i family of products has been tested and found to meet or exceed the
requirements of U.S. (47 CFR 15), Canadian (ICES-003), Australian (AS/NZS 3548), and
European (EN55011) regulations for Class A digital devices when installed in accordance with
the guidelines noted in this manual. These various regulations share commonality in content
and test levels with that of CISPR 11 and based on this commonality testing to the each
individual standard was deemed inappropriate.
The FCC requires the following note to be published according to FCC guidelines:
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Industry Canada requires the following note to be published:
Note: This Class A digital apparatus complies with Canadian ICES-003.
PACSystems* RX3iPower Sync and Measurement System – January 2013
A-3
A
GFK-2749