Configuration For 480V 4-Wire Wye Synchro/Power Control Connection - GE PACSystems RX3i User Manual
Power sync and measurement system
Hide thumbs
Also See for PACSystems RX3i:
- User manual (169 pages) ,
- Command line interface manual (116 pages) ,
- Application manual (39 pages)
Table of Contents
Advertisement
3
Configuration for 480V 4-Wire WYE Synchro/Power Control Connection
Grid 1 Tab
Grid 2 Tab
3-44
The following shows a typical hardware configuration for a 3-phase, 4-wire WYE power
paralleling/synchronizing application. The offset and gain values are shown at their default
values. For maximum accuracy, the offset and gain values must be set, based on the
IC694PSM001 module faceplate label and on the IC694ACC200 terminal assembly label
calibration constants. Choose the 600V range and enter 480.0V as the nominal voltage.
The Nominal Voltage is the anticipated Phase-to-Neutral voltage in the WYE
configuration.
PACSystems* RX3i Power Sync and Measurement System – February 2013
GFK-2749
Advertisement
Table of Contents
