Table of Contents
Advertisement
•
Projector Upgrade packages
•
Backup packages to restore from
•
Rental files to license the projector for Rental mode
•
Test Patterns (PNG files only)
•
Gamma files
Examples of items that can be downloaded include:
•
Projector Backup files
•
Projector Certificates (required for content decryption)
•
Interrogator files (for support and troubleshooting)
4. If the projector has a GDC IMB SR-1000 installed and configured, you can access the GDC IMB
Web UI by using the Media Block tab.
Turning the projector on or off
Turn on the projector to display content, or turn off the projector to conserve energy or service the
projector.
To operate the projector, the circuit breakers must be in the ON position. If you are servicing the
projector or removing the protective covers, ensure that the MAIN and UPS circuit breakers are in the off
position.
In the right toolbar, select and hold Power.
If the light source is on when turning off the projector, the light source enters a ten-minute
cool-down period automatically.
Logging on to the projector
Log on to the projector to access projector menus.
1. Select Login.
2. In the User list, select a user name.
3. Enter your password.
4. Select Login.
Turning the light source on or off
Turn the light source on to display content or view test patterns, turn the light off to extend the life of
the lasers.
•
To turn the light source on or off, in the right toolbar, select and hold Light.
If you turn on the light source when the projector power is off, power is turned on
automatically.
Allow the projector to cool down for 10 minutes after turning it off.
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB
020-103244-04 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Installing and setting up
27
Advertisement
Table of Contents
