Table of Contents
Advertisement
5. Adjust the brightness and white settings as required for the new configuration.
Deleting a laser file
Delete a laser file when the configuration is no longer required.
1. In the left navigation menu, select Laser Settings > Laser Power/LiteLOC Setup.
2. Select Display White Test Pattern.
3. In the Laser File list, select the file to delete.
4. Select Delete
5. To confirm the deletion, select Delete.
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB
020-103244-04 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
.
Managing the light source
45
Advertisement
Table of Contents
