Table of Contents
Advertisement
2.2
Installation, commissioning and operation
The compressed air meter was built and tested reliably according to
state-of-the-art technology and left the factory in an appropriately safe
condition.
As the user, you are responsible for compliance with all valid
safety regulations, including:
• Installation specifications
• Local standards and regulations.
The manufacturer has undertaken all necessary measures to ensure
safe operation. The user must ensure that the instruments are set up
and installed in such a way that their safe use is not affected.
This instruction manual contains information and warnings that must
be followed by the user in order to ensure safe operation.
• Installation, commissioning, operation and maintenance of the
measuring unit may only be performed by trained, authorised
personnel.
The personnel must be authorised for the specified tasks by the
system operator.
• The authorised personnel must have read and understood this
instruction manual and comply with the instructions set out in it.
• Check all connections for correctness before commissioning the
complete measuring station.
• Do not commission damaged products and keep these from being
inadvertently commissioned. Mark the damaged products as
defective.
• Faults at the measuring point are only to be corrected by authorised
and specially trained personnel.
• If faults cannot be corrected, the products must be taken out of
operation and be safeguarded from inadvertent commissioning.
• Repairs that are not described in this instruction manual may only be
carried out directly by the manufacturer or by the service organisation.
7
Advertisement
Table of Contents
