Table of Contents
Advertisement
4 Installation
4.2
20
Assembly, commissioning
and operation
The compressed air counter was reliably built and checked according to
state-of-the-art technology and left the factory in a properly secure state.
As the user, you are responsible for the compliance with all valid safety
regulations, including:
• Installation specifications
• Local standards and regulations.
The manufacturer has undertaken all necessary measures to ensure safe
operation. The user must ensure that the instruments are set up and in-
stalled in such a way that safe use is not impacted.
The instruments are factory-tested and were delivered in a reliable state.
These operating instructions contain information and warnings that must be
followed by the user in order to ensure safe operation.
• Assembly, commissioning, operation and maintenance of the measuring
unit may only be performed by trained authorized personnel. The person-
nel must be authorized for the named functions by the system operator.
• The authorized personnel must have read and understood these operat-
ing instructions and comply with the directions in these operating instruc-
tions.
• Check all connections for correctness before the commissioning of the
complete measuring point.
• Do not commission damaged products and keep these from being inad-
vertently commissioned. Mark the damaged products as defective.
• Faults at the measuring point are only to be corrected by authorized and
specially trained personnel.
• If faults cannot be corrected, the products must be taken out of operation
and secured from inadvertent commissioning.
• Repairs that are not described in these operating instructions may only
be carried out directly by the manufacturer or by the service organization.
Exclusion of liability:
Liability of the manufacturer and its assistants exists only in the event of de-
liberate acts or gross negligence. The extent of liability is limited to the value
of the respective order placed with the manufacturer.
The manufacturer accepts no liability for damages that occur due to non-
observance of the safety instructions or noncompliance with the instruction
manual or the operating conditions. Consequential damages are excluded
from the liability.
Advertisement
Table of Contents
