Explanation Submenu Mem; Explanation Submenu Dis - TESTO 6457 Instruction Manual

Explanation submenu MEM

Parameter Explanation and setting options
Lo.F Minimum value of the flow volume measured in the process
Hi.F Maximum value of the flow volume measured in the process
Minimum value of the temperature measured in the process
Lo.T
Hi.T Maximum value of the temperature measured in the process

Explanation submenu DIS

Parameter Explanation and setting options
Standard process value display
L1
L2.Temp = current process value for flow and temperature
diS.L
L2.Totl. = current process value for flow and totaliser
L3
Display refresh rate
d1 = High
diS.U
d2 = Medium
d3 = Low
Display rotation: 0°, 90°, 180°, 270°
diS.R
Display brightness: 25%, 50%, 75%, 100%, OFF
diS.B
Measurement display in RUN mode switched off
= current process value for flow
= current process value for flow and temperature and
totaliser
43