Explanation Submenu Colr; Explanation Submenu Sim - TESTO 6457 Instruction Manual

Explanation submenu COLR

The displayed parameters change when the factory settings in
submenu OUT1 and OUT2 are changed.
Note
Parameter Explanation and setting options
coL.F Colour of the characters in the display for the flow value
cFH.F Upper limit value for the colour change for flow measurement
dFL.F Lower limit value for the colour change for flow measurement
coL.T Colour of the characters in the display for the temperature value
cFH.T Upper limit value for the colour change for temperature
measurement
cFL.T Lower limit value for the colour change for temperature
measurement
Colour of the characters in the display for the totaliser value
coL.V
Permanently black/white
bk/wh
yellow Permanently yellow
green Permanently green
red Permanently red
r-cF Display colour between limit values cFL...cFH red, outside green
G-cF Display colour between limit values cFL...cFH green, outside red

Explanation submenu SIM

Parameter Explanation and setting options
S.FLW Simulated flow value
S.TMP Simulated temperature value
Measured value below the detection range → error message
cr.UL
Measured value below the display range → warning
UL
OL Measured value above the display range → warning
cr.OL Measured value above the detection range → error message
Simulation duration in minutes
S.Tim
Simulation duration_ OFF,On
S.On
45