Colour Of The Characters In The Display - TESTO 6457 Instruction Manual

4.3.8

Colour of the characters in the display

The colour of the characters in the display can be set via the parameter
[coL.x]:
▪
–
–
−
–
▪
–
–
The limit values can be freely selected within the measuring range
and are independent of the output function set for OUT1 and OUT2.
Note
22
Permanent definition of the display colour:
bk/wh (black/white)
yellow
green
red
Colour change from red to green or vice versa:
r-cF (red display colour between the limit values cFL...cFH)
G-cF (green display colour between the limit values cFL...cFH)
cFL = lower limit value
cFH = upper limit value
MAW = zero/lower range value
MEW = full scale value/upper range
value