Switching and
pulse signal
-
EMC
4.2
Accessories
Replacement sensor
4.2.1
The replacement sensor serves as a replacement in case of damage to or
loss of the original mass flow sensor.
Note
Connecting cable with electric isolation
4.2.2
A suitable connection cable is available as an accessory. The cable is
5 m long and is used for the electrical connection of the transmitter to the
customer's control system. The cable is delivered with an appropriate
connector for the mass flow sensor on one side and with open cable
ends on the other side.
Optionally, a cable with additional electrical isolation is also available;
with this cable, the electrical isolation is built into the instrument
connector and is used for the galvanic electrical isolation of the sensor
output from the electronics connected to it.
Calibration options
4.2.3
• ISO certificate
An ISO certificate from the manufacturer documents six measuring points
including the measuring conditions.
14
overload-proof
DIN EN 60947-5-9
When ordering a new sensor, please indicate the certificate
number of the old sensor in order to take account of customer-
specific measuring conditions directly during calibration.