Necchi 590 Instruction Manual page 7

15. "Do not use bent needles."
16. "Do not pull or push fabric while stitching. It may deflect the needle causing it to
break."
17. " Switch the sewing machine off ("0") when making any adjustments in the needle
area, such as threading needle, changing needle, threading bobbin, or changing
presser foot, etc."
18. " Always unplug sewing machine from the electrical outlet when removing covers,
lubricating, or when making any other user servicing adjustments mentioned in
the instruction manual."
19. " To avoid electrical shock never put the machine nor the mains cable or mains
plug into water or other liquids."
20. " The LED lamp maximum power is 0.3W, maximum voltage is DC 5V. If the LED
light is damaged, you should not use the product and send it to the manufacture
or service agent to repair or replace at once."
21. " Caution - to avoid injury:
- Unplug the foot controller of the appliance when leaving it unattended.
- Unplug the foot controller of the appliance before carrying out any
maintenance."
"CAUTION-
"SAVE THESE INSTRUCTIONS"
"This product is for household use, or equivalent. "
This appliance complies with EEC Directive 2004/108/EC covering the
electromagnetic compatibility.
DISPOSAL:
This equipment is marked with the recycling symbol. Do not dispose this
product as unsorted municipal waste. Collection of such waste separately
for special treatment is necessary. (European Union only)
Moving parts - To reduce risk of injury, switch off before
-
servicing. Close cover before operating machine."
5