Mitsubishi NZ2GFCF-D62PD2 User Manual page 63

Hitch the hook to
the top of the DIN rail.
DIN rail
stopper
DIN rail
stopper
● Do not slide modules from the edge of the DIN rail when mounting them. Doing so may damage the metal part located on
the back of the module.
● Tighten the DIN rail mounting screws at intervals of 200mm or less.
6.
Hitch the upper hook of the DIN rail stopper to the
top of the DIN rail.
7.
Slide the DIN rail stopper up to the left side of the
modules.
8.
Hold the DIN rail stopper in the direction opposite to
the arrow on the stopper and tighten the screw with
a screwdriver.
9.
Install the DIN rail stopper on the right side of the
DIN rail
module in the same procedure.
stopper
Install the stopper upside down for the right side.
CHAPTER 6 INSTALLATION AND WIRING
6
61