Table of Contents
Advertisement
3.
Display the "CC IE Field Configuration" window and configure the configuration and station
number of the slave station as follows.
4.
Close the "CC IE Field Configuration" window.
[CC IE Field Configuration]
5.
Display the refresh parameter setting window and configure the setting as follows.
6.
Write the set parameter to the CPU module of the master station and reset the CPU module, or turn
off then on the power supply.
[Online]
[Write to PLC...]
button
[Close with Reflecting the Setting]
button
RESET
or Power OFF
ON
CHAPTER 9 PROGRAMMING
191
9
Advertisement
Table of Contents
Troubleshooting
