Mitsubishi NZ2GFCF-D62PD2 User Manual page 173

(3) Method for clearing an error by executing the command of the slave station
The following shows how to clear an error by executing the command of the slave station.
List of
stations
1.
Select the high-speed counter module in "List of
stations" on the "CC IE Field Configuration"
window.
2.
Open the "Command Execution of Slave Station"
window.
[CC IE Field Configuration]
Execution of Slave Station]
3.
Set "Method selection" to "Error clear request" and
click the
4.
When the window shown on the left is displayed,
click the button.
5.
The error for the high-speed counter module is
cleared.
CHAPTER 8 FUNCTIONS
[Command
button.
171
8