Mitsubishi NZ2GFCF-D62PD2 User Manual page 164

Ex. Setting item
Coincidence output 1 channel
assignment setting
Coincidence output 2 channel
assignment setting
Coincidence output 3 channel
4 assignment setting
Coincidence output 4 channel
assignment setting
CH1 PWM output assignment setting
(RWw1D)
Coincidence output 1 channel
assignment setting
Coincidence output 2 channel
assignment setting
Coincidence output 3 channel
5 assignment setting
Coincidence output 4 channel
assignment setting
CH1 PWM output assignment setting
(RWw1D)
For Coincidence output that is assigned as the PWM output terminal in CH PWM output assignment setting (RWw1D,
RWw35), the setting in "Coincidence output 1 to 4 comparison condition setting" is disabled.
162
Setting detail
0: CH1
Coincidence output 1 to 2 are
0: CH1
assigned to CH1 and
Coincidence output 3 to 4 are
1: CH2
assigned to CH2.
1: CH2
Coincidence output 3 is
0004
assigned to the PWM output
H
terminal.
0: CH1
0: CH1
Coincidence output 1 to 4 are
assigned to CH1.
0: CH1
0: CH1
Coincidence output 1 to 4 are
000F
assigned to the PWM output
H
terminal.
Operation
The error code (670 ) is stored in CH
H
Latest error code (RWr22, RWr3A) since
the Coincidence output is assigned to
Coincidence output 3 that is used by CH2.
At this time, Error status flag (RXA) and
the ERR. LED turns on.
Coincidence output 1 to 4 are assigned to
the PWM output terminal and the
operation is performed. (The same PWM
waveform is output from all the
Coincidence output terminals.)