Mitsubishi NZ2GFCF-D62PD2 User Manual page 120

(1) Setting method of the cam switch function
1.
Set "Parameter write" for "Method selection".
"CC IE Field Configuration" window
2.
Set "1: Cam Switch Function" for "Comparison output setting".
3.
Set "1: Stage 1" for "Cam switch output unit assignment setting".
4.
Set a channel to be compared for "Cam switch output 1 to 16 channel assignment setting".
5.
Set Cam switch function parameter data (address: 1500
For details, refer to the following.
Page 119, Section 8.3.4 (2)
The cam switch function and the number of ON times integration function cannot be used together.
118
[CC IE Field Configuration]
Select a high-speed counter module in "List of stations"
[Parameter Processing of Slave Station]
to 1FFF
H
) in a program.
H