Table of Contents
Advertisement
18.3
Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
Main work
–
Remove oil filler plug
cover.
–
Fill engine oil to the middle
–
Add the same engine oil that was used when the motor was
changed.
Engine oil (SAE 10W/50) (
Info
For optimal performance of the engine oil, do not mix
different types of engine oil.
We recommend making an oil change in this case.
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
S03036-10
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the engine oil level. (
SERVICE WORK ON THE ENGINE 18
1
with the O-ring from the clutch
A
of the level viewer.
p. 162)
p. 121)
125
Advertisement
Table of Contents
