Start-Up Information - Emerson Rosemount 2410 Reference Manual

Reference Manual
00809-0100-2410
Table 5-1: Measurement Variables and Presentation on the Rosemount 2410 Display
Variable
Level
Ullage
Level Rate
Signal Strength
Free Water Level
Vapor Pressure
Liquid Pressure
Air Pressure
Ambient Temperature
Vapor Average
Temperature
Liquid Average
Temperature
Tank Average Temperature TANK T
Spot 1 Temperature
Spot n Temperature
Spot 16 Temperature
Observed Density
Reference Density
Volume
Flow Rate
User Defined 1
Tank Height
Delta Level
5.3

Start-up information

When the Rosemount 2410 starts up, all LCD segments light up for approximately 5
seconds. The start-up information appears on the display when the software initialization
procedure is finished. The Primary Bus configuration appears first, followed by the
Secondary Bus configuration. Each item appears a few seconds on the display:
Rosemount 2410 Tank Hub
Presentation on display Description
LEVEL
ULLAGE
LRATE
SIGN S
FWL
VAP P
LIQ P
AIR P
AMB T
VAP T
LIQ T
TEMP 1
TEMP n
TEMP 16
OBS D
REF D
TOV
F RATE
UDEF 1
TANK R
ΔLVL
Product level
Distance from the upper reference point to the product surface
The speed of level movement up or down
Signal amplitude of the surface echo
Free water level at the bottom of the tank
Automatic or manual Vapor Pressure value
Automatic or manual Liquid Pressure value
Automatic or manual Air Pressure value
Automatic or manual Ambient Temperature value
Average temperature of vapor above the product surface
Average temperature for all spot sensors submersed in liquid
Average value of all temperature sensors in the tank
Temperature value for spot sensor no. 1
Temperature value for spot sensor no. "n"
Temperature value for spot sensor no. 16
Automatic or manual Observed Density
Product density at standard reference temperature 15°C (60°F)
Total observed volume
Flow rate
Up to 5 user defined variables
Distance from Tank Reference Point to Zero Level
The difference between two level values
Operation
December 2019
71