Chapter 5 Operation; Safety Messages; Integral Display - Emerson Rosemount 2410 Reference Manual

Reference Manual
00809-0100-2410
5 Operation
5.1

Safety messages

Instructions and procedures in this section may require special precautions to ensure the
safety of the personnel performing the operations. Information that potentially raises
safety issues is indicated by a warning symbol (
before performing an operation preceded by this symbol.
WARNING
Failure to follow safe installation and servicing guidelines could result in death or serious
injury.
• Ensure only qualified personnel perform the installation.
• Use the equipment only as specified in this manual. Failure to do so may impair the
protection provided by the equipment.
• Do not perform any services other than those contained in this manual unless you are
qualified.
Explosions could result in death or serious injury.
• Verify that the operating environment of the device is consistent with the appropriate
hazardous locations certifications.
• Before connecting a handheld communicator in an explosive atmosphere, ensure that
the instruments in the loop are installed in accordance with intrinsically safe or non-
incendive field wiring practices.
• Do not remove the gauge cover in explosive atmospheres when the circuit is alive.
5.2

Integral display

The Rosemount
display for presentation of measurement data and diagnostics. When the device is
switched on, the display presents information such as device model, communication
protocol (Modbus
number, unit ID, and write protection status. See
up information.
When the Rosemount 2410 is up and running the display presents Level, Signal Amplitude,
Volume and other measurement variables depending on how the display is configured.
The available parameters are listed in
The display has two rows for data presentation. The upper row shows tank name (up to six
characters) and measurement values. The lower row shows variable type and
measurement unit.
Rosemount 2410 Tank Hub
™
Rosemount 2410 Tank Hub can be equipped with an optional integral
®
, Enraf, etc.) and address, relay configuration, software version, serial
Table
). Refer to the following safety messages
Table 5-2 for more information on start-
5-1.
Operation
December 2019
69